Verizon Gizmo Watch Screen Replacement – Try 5 Easy Steps!
All smartphone and smartwatch users have sometimes dropped their device and cracked the screen. Gizmo watch users can face that too. However, Since it is a kid’s watch, you may not be sure about the Verizon Gizmo watch screen replacement.
Luckily, Verizon Gizmo offers service, including screen replacement if the watch is under warranty. However, you can do it all by yourself. You just need to remove the back part and front part of your watch by sliding the blade, and then attach the new screen and the same back part.
We will describe the replacement process in detail. So, stay tuned.
Can You Replace the Verizon Gizmo Watch Screen?
As said before, the Verizon Gizmo watch screen is repairable if it is under warranty. This is not all; what type of damage your Gizmo watch had also depends on whether you should replace it or not.
For instance, you can repair your Gizmo watch screen with UV resin and a resin curing lamp if the damage is not extreme. But if the screen is completely cracked and you can’t repair it, go for a replacement.
The Verizon Gizmo will tell you whether your watch needs a repair or replacement. If it needs replacing, they will do it for sure.
The good news is that you can replace your Gizmo watch’s screen yourself. You will need only 30 to 60 minutes of your precious time.
Read Also: Why Is The Gizmo Watch Not Charging? [Causes And Fixes]
Verizon Gizmo Watch Screen Replacement: Step-by-Step
Most users would like to have their Gizmo watch screens replaced by a repair shop. However, if you want, you can replace the screen yourself too. Don’t worry; it won’t call it a day for you. Before you opt for the steps, keep some materials ready with you. Like:
- Blade
- Tweezer
Step 1: Remove The Back Of Screen
Firstly, remove the watch’s belt so that you can work with the screen comfortably and turn the watch off.
Now use the blade to poke your watch in the corner where the back part can get out. Then slide it overall, and the back part of the screen will come out.
Step 2: Bring Out The Shards
Next, you have to get a tweezer that is bent up. This will help you remove small shards from around your watch’s cracked screen.
Don’t try to remove the bigger shards. Because any pressure on them that goes in the wrong direction can damage the display.
Read Also: GizmoWatch 2 Vs 3 In-Depth Comparison: Which One Is Better?
Step 3: Monitor The Plastic Sliding
After removing the small shards, you will notice a gasket in between the screen and base. This gasket is made for the focus touch.
Removing the gasket won’t allow the metal and glass to play together. It is because the gasket plays the role of a cushion here and provides a seal against water.
Also, repairing the seal is quite impossible, so try not to damage it while getting the screen out.
After removing the shards, there will be a tiny hole in your screen’s corner. Take the blade-like piece of plastic to take the watch out following that hole.
It can be hard enough to push out the screen from the watch. In that case, wiggle the screen a bit with the tweezers and try again.
Don’t go too far while sliding the plastic. Or else, you may clip the flex cable of the watch’s display.
Be careful when taking the screen out. The plastic shouldn’t touch the tip. Although Verizon Gizmo claims that its watch is flexible, any wrong step can damage its device.
Read Also: Why Gizmo Watch Stuck On Connecting To Verizon? (Solved)
Step 4: Remove The Screen’s Jacks
Now you can open the display like a small door, and the motherboard will be visible. You will have two tape-like jacks; one is for touch, and the other is for display. You can remove them with the help of your tweezer.
Step 5: Attach The New Screen
Hopefully, you have your new screen with you. Fix it on your watch normally. There is no needle to wiggle to make adjustments with the tweezers. Afterwards, attach the back part of your watch and the belts too.
Read Also: Is the Gizmo Watch good for kids? [What Does It Do?]
How To Protect Verizon’s Gizmo Watch Screen?
You cracked the screen of your Gizmo watch and replaced it successfully; great job. But you have to be more careful from now on because breaking the display again and again may prevent the watch from performing well.
Here are a few tips that can help you keep your Verizon Gizmo watch screen perfect for a long time.
Clean The Screen Frequently
Cleaning your Verizon Gizmo watch frequently will give you a healthy screen and get rid of unwanted scratches. And if you find any scratches, you can fix them with nail polish or a vacuum sealer.
Read Also: Are Gizmo Watches Waterproof Or Just Water Resistant?
Get A Screen Protector
A screen protector won’t cause as much damage as the watch would if it were dropped. The screen protector will work like a shield and prevent further cracks. You may not get extreme protection, but 50/50 protection.
Use A Watch Case
Like a screen protector, a watch case can be a savior for your Gizmo watch. It will prevent scratches, cracks, and dents.
How Much Does It Cost For A Verizon Gizmo Watch Screen Replacement?
The cost of replacing your Gizmo watch screen may vary according to its model. For instance, you have to pay $50 to $100 to replace the screen of the Gizmo watch 2. Whereas the replacement of the Gizmo watch 3 screen can cost you up to $150.
Read Also: 6 Best Gizmo Watch Alternatives to Track Your Child
Frequently Asked Questions
So now you can replace your Gizmo watch screen yourself. Since it is a delicate task, you must know more about it. Let’s see if the below queries are helpful or not.
How do you replace your Gizmo Watch’s face?
Swipe your watch’s green button to the left or right, where the setting option is. In settings, you will get the face icon, which must be in the upper right. Then you will find some themes there, like mosaics, bubbles, etc. Choose any one of them, and you have a new watch face.
What is the cost of the Gizmo Watch service?
All users have to pay $35 as an activation fee. The cost is mainly for the device payment plan. If the watch is under warranty, you won’t have to pay for the service.
How do you replace the Verizon Gizmo Watch?
To replace your Gizmo watch, first turn the power button on and go to the GizmoHub app. Click on the check mark and Let’s Get Started. Now you can give your email and password, create a profile, and do all the customizable settings.
What is the battery life of the Gizmo Watch?
Gizmo watch 2 can last for 3 days or less, depending on its usage. On the other hand, Gizmo watch 3 can last 1.5 to 3.5 days.
Conclusion
Hopefully, you can do your Verizon Gizmo watch screen replacement flawlessly. Just make sure to follow the steps carefully and with great care.
Before you opt for this replacement, ask for guidance from a repair shop or Gizmo Support. Also, during the process, try not to go far inside the display.
Lastly, get a screen protector for your Gizmo watch to avoid further cracks and scratches. Rino Gear and Supershieldz are some of the popular choices for smartwatch screen protectors.
Read Also: Can You Get A Gizmo Watch Without Verizon? [5 Best Alternatives]
